Find vids

2019–2025 Chevrolet Silverado 1500 5.3L V8

Oil and filter change

The truck goes up on jack stands, about 45 min

$1

  • One-time $1. Not a subscription. No account.
  • Wrong video for your car? Reply to your Stripe receipt within 7 days for a full refund.
  • Secure checkout by Stripe. Terms
Doing it later?
Add

Add to Google Calendar ·

Oil8.0 qt 0W-20 dexos1
Drain plug18 lb-ft
FilterHand-tight + 3/4–1 turn
AfterReset oil life

What you need

Links open Amazon.

Parts

  • 8 qt
    Engine oilSAE 0W-20 full synthetic, dexos1 approved (dexos1 Gen 3 listed for 2023–2025)One 5-qt jug isn't enough; get 8 quarts total.
    Amazon
  • 1
    Oil filter (2019–2021 and 2022 LTD)ACDelco PF63E (GM 19330000)For 2019–2021 trucks and the 2022 Silverado 1500 LTD.
    Amazon
  • 1
    Oil filter (2022–2025, except 2022 LTD)ACDelco PF63 (GM 12707246)For 2022–2025 trucks except 2022 LTD. Not the PF63E.
    Amazon
  • 1
    Drain plug sealHave one ready; replace only if the old seal is damaged.
    Amazon

Tools

  • 1
    Torque wrenchRange must include 18 lb-ft (25 N·m), the drain plug torque
    Amazon
  • 1 set
    Ratchet and socket set3/8 inch drive
    Amazon
  • 1
    Oil filter wrenchAdjustable 3-jaw type, 3/8 inch drive
    Amazon
  • 1
    Floor jackRated for the truck's weight; lift at the frame, not rockers.
    Amazon
  • 2
    Jack standsNever work under the jack alone; stands go under front jack pads.
    Amazon
  • 1 pair
    Wheel chocksBlock the rear wheels before lifting the front.
    Amazon

Supplies

As an Amazon Associate I earn from qualifying purchases.

Every step in this video (10)
  1. Take the oil fill cap off first. Then raise the front onto jack stands, never just the jack.
  2. Underneath, the filter hangs down from the oil pan, and the drain plug sits right beside it.
  3. Set a drain pan below, remove the plug, and let it drain completely. Check the plug's seal, and replace it if it's damaged.
  4. Unscrew the old filter. Make sure its rubber gasket came off too. A doubled gasket will leak.
  5. Wipe clean oil on the new gasket. Spin the filter on until the gasket touches, then turn it 3/4 to 1 full turn more.
  6. Refit the plug, and tighten it to 18 lb-ft (25 N·m). That's light, so don't overtighten.
  7. Lower the truck, and pour in 8 quarts. One 5-quart jug is not enough. Then refit the cap.
  8. Start the engine, and check the filter and the plug for leaks.
  9. Shut it off on level ground, wait 2 to 3 minutes, and check the dipstick. The oil should be between the two marks.
  10. Last, reset oil life to 100% on the dash. It won't reset by itself.

Written by our repair experts, checked against real jobs mechanics logged. If your owner’s manual says something different, go with the manual.

Look up another car All videos